Category: bmw

Categories
bmw BMW Greensboro bmw parts BMW service Greensboro NC Service

BMW Service Greensboro NC | Prevent BMW From Burning Oil

At around 80,000 miles, all BMWs start burning oil and may encounter compression problems, or “burned valves”. Eurobahn is your BMW Greensboro NC Service Center and Valve jobs involve removing the engine’s cylinder head(s), so that the guides, seats and valves can be refurbished. This allows oil control and compression to be restored.

Usually, valve train jobs begin by dismantling, cleaning and examining the cylinder head. Heads made from cast iron are “magnafluxed”, to search for hairline cracks. Magnafluxing involves sprinkling iron powder onto the head, whilst exposing the head to a powerful magnetic field simultaneously.

BMW Service Greensboro NC
BMW Service Greensboro NC

 

Usually, valve train jobs begin by dismantling, cleaning and examining the cylinder head. Heads made from cast iron are “magnafluxed”, to search for hairline cracks. Magnafluxing involves sprinkling iron powder onto the head, whilst exposing the head to a powerful magnetic field simultaneously.

After the head has passed this inspection, it is examined for flatness. Undue roughness, warpage or other damage could make the head gasket malfunction. Should the head exceed the maximum permissible out of flatness specifications, it has to be replaced or resurfaced.

       Eurobahn Motorsports is able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional BMW Service Greensboro NC dealership repair shop.

Now, attention turns to the guides, seats and valves. The guides are inspected for wear, and they are virtually always worn. Hence, they have to be either relined, knurled (where the bore size of the guides is reduced, by cutting grooves into the guides’ interior diameter) or replaced. The cylinder head seats are either ground or cut, to repair the sealing surface.

Prevent Your BMW Burning Fuel

Each valve spring is examined and tested to ensure that it is still able to maintain the correct pressure. The keepers, spring retainers and other components are examined as well. Any damaged or worn hardware is replaced. Then, the valves are fitted into the head and leveled to restore the correct valve height.

Prevent Your BMW Burning Fuel
Prevent Your BMW Burning Fuel

Whereas every dealer repair shop performs all of these steps, they do not do so as affordable as a certified repair shop. Having the engine valve train conditioned can cost your pocket book quite a bit, however before you write a check or scan a credit card contact an independent certified BMW Repair service Greensboro NC center like Eurobahn Motorsports. We are able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional dealership repair shop.

 

Categories
bmw BMW Greensboro bmw parts BMW service Service

BMW Service Greensboro NC | BMW Suspension System Repair

Your BMW’s suspension system is an intricate network of cooperating (usually, anyway) components designed to give you a smooth, even, stable ride. Since the suspension is ground zero when it comes to road abuse, the parts wear out, and even break. If your car doesn’t seem to ride like it used to, you may have a problem down below.

BMW Service Greensboro NC
BMW Service Greensboro NC

If your BMW is experiencing any of the following, bring it to Eurobahn Motorsports BMW Greenboro NC for a professional diagnostics and BMW repair:

• If your BMW is Pulling to One Side While Driving.
• Flip-flop wheel shimmy. Wheels seem to wander and wiggle rapidly back and forth.
• Porpoising over bumps or uneven roads. Porpoising, aka bouncing, dipping, diving. Car keeps going up and down after you go over a bump.
• Steering seems to be slipping. As you turn the wheel or hold it in a turned position, it feels like its slipping slightly back and forth.
• If its Hard to steer your BMW and the wheel is hard to turn, especially while moving at slow speed, then it needs BMW repair service Greensboro NC .
• Steering wheel vibrates at speed. Excessive vibration while traveling a constant speed, especially highway speeds.
• Loose or sloppy steering. Steering has excessive play and wanders from side to side.
• Clunking over bumps. Feeling clunks and knocks through the steering wheel when you go over bumps or even cracks in the road.
• If your BMW is Screeching and screaming it needs to be taken to Eurobahn’s BMW Service Center Greensboro NC Steering emits loud screeching when steering at low speeds, such as parking.

At Eurobahn Motorsports we have Factory Trained BMW Service Technicians so we are your choice for BMW Repair Greensboro NC . Schedule Your Appointment with US Today!

Categories
Audi bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC Service

Replace Your Wiper Blades- Greensboro, NC

Having a good pair of windshield wipers is extremely important. We’ve all experienced the frustration and fear of not being able to see clearly during a storm, or when our windshield is just dirty.

BMW windshield wiper

It seems like your wiper blades are always at their worst when you need them the most. But windshield wipers are like most other vehicle parts– they require regular attention in order to work their best.

You really ought to replace your wiper blades twice a year; in the spring and the fall. If it’s going to be a particularly harsh winter in Greensboro, you may even want to get special winter blades in the fall. Winter blades are designed to resist freezing.

Speaking of winter and freezing conditions, if your car has been sitting for a long time and the windshield becomes frozen, don’t use your wipers to clear off snow and ice. That’ll just tear up the blades and cause them to wear out more quickly. It may even damage the wiper motor.

Over time, wiper blades become hard and brittle, and then tear. They also lose their flexibility and just don’t cover the windshield effectively.

Worn wiper blades aren’t just a safety hazard; they can also scratch your windshield. That may require replacing the entire windshield; a big cost for such a little part.

Replace worn blades right away. Your local service center can provide you with a quality replacement blade. They cost about the same as they would at the store; but installation is included at Eurobahn Motorsports.

Of course you also need washer fluid to help your blades do their work. Even though your local Greensboro service center will top off the washer fluid with a full service oil change, it is a good idea to have some extra fluid at home, or in the car if you are on a long trip.

Always use windshield washer fluid. Plain water, even that fancy bottled water, may freeze in the fluid reservoir or on the windshield itself, making things worse. Besides, water won’t do a good job of cleaning your windows.

And remember that some vehicles have two reservoirs: one for the windshield and one for the back window – which may be under the hood or somewhere in the back. Schedule A service Today!

Categories
bmw BMW Greensboro BMW service Greensboro

Suspension Service in Greensboro, NC

When you hear the word ‘suspension‘, you may think back to those energetic days of grade school. Well, your car’s suspension is actually a good thing because it keeps your car up off the road and helps provide a comfy ride. It needs to keep your wheels firmly planted over bumps and through curves. Your suspension system has many parts. If you look under your car, it’s basically everything that connects your wheels to the car’s frame. These are heavy duty parts that do a lot of work. They need to be inspected for damage and excessive wear at least once a year. A good time for this is when you get your annual alignment service.

BMW Alignment Service Greensboro NC

Here are some warning signs that your suspension may have problems:

the car pulls to one side;

it wanders;

the steering is erratic;

you see uneven tire wear;

you experience a poor ride or handling;

you see oil leaking from shocks

. . . You just don’t feel in control when you’re driving.

Some suspension parts just wear out with use. Shocks and struts eventually lose their ability to control your ride. Wheel bearings need to be repacked every couple of years. And some suspension pieces need to be lubricated when you get your oil changed. Your service advisor at Eurobahn BMW Greensboro, NC can oversee an inspection and tell you what problems you may have.

If you’re in an accident, your suspension can be damaged or knocked out of alignment. Even a minor accident, like hitting a curb around Greensboro, NC or even a large rock can mess things up. With a minor accident it’s tempting to just get an alignment or wheel balance to correct the problem. But if there’s some damage, a simple alignment won’t actually fix the problem, and you’ll just have to align it again after the repairs are made. So if you have an accident, get your suspension system inspected right away. Suspension problems should be fixed immediately because they can lead to unsafe handling.

One big cause of suspension damage is potholes – those nasty magnets that seem to draw our tires right into them. Well, Here are some tips for avoiding damage from potholes: First, keep your tires at their full air pressure. That gives tires their maximum resiliency and will hopefully keep your wheels or other suspension parts from crunching on a big hole. Next, just pay attention. When you see a hole you can’t miss, slow down before you hit it. Driving at a slower speed will limit the damage, and may keep your drink from spilling. But don’t brake directly over the pothole. That will cause the car’s weight to shift forward and add to the potential damage. Schedule Your Appointment Today!

Categories
Audi bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC Porsche Service

Air Conditioning Service- Greensboro, NC

Warm weather or cold, North Carolina drivers still need to think about their sedan’s air conditioning. Most people don’t service their air conditioning until after it fails. At Eurobahn Motorsports, we can advise you on your vehicle manufacturer’s preventive maintenance schedules for BMW service, just as we do for transmission service, oil changes and so on.

BMW Air conidtioning

Maintaining your air conditioning system means that you always have enough refrigerant to properly do the job. Small leaks in the sedan’s air conditioning system allow the refrigerant to escape and the system can’t cool the air as well. We see that a lot at Eurobahn Motorsports in Greensboro.

The refrigerant also contains a special oil that lubricates air conditioning components, and keeps the seals resilient. Low refrigerant and lubricating oil means that the air conditioning parts will wear out prematurely, and all North Carolina car owners know that air conditioning repairs can be costly. At Eurobahn Motorsports BMW, we recommended that the air conditioner be run regularly, even during winter months, to keep the parts and seals lubricated.

BMW Air conditioning service at Eurobahn Motorsports starts with a visual inspection of the components for signs of damage or leaks. The compressor is driven by a belt from the engine, most often the serpentine belt, so it’s inspected for cracks or wear. The air conditioning compressor and other components are checked for proper operation. Then comes the leak test. If a leak is detected, often in a hose or connection, it’s repaired and the system is retested.

Then the old refrigerant is evacuated and the system is recharged with clean, fresh refrigerant. A final test insures that the sedan’s air conditioner is working, and you’re on your way.

How often this should be done varies from vehicle to vehicle. Your sedan owner’s manual will have the manufacturer’s recommendation and, of course, your Eurobahn service advisor can tell you. It’s typically every two years.

If you’re not getting enough cool air you know something’s wrong. Also, if you hear strange sounds when you turn the air on, there might be a problem with the compressor and you should get it checked out at Eurobahn. Replacing a bad A/C clutch in a sedan is cheaper than waiting for it to ruin the compressor.

BMW Greensboro drivers need to be aware that there’s one more thing that isn’t directly related to air conditioning service, but does impact the quality of the air in your sedan. And that’s your cabin air filter. This filter cleans dust, pollen, pollution and other impurities in the air that comes from the heater and air conditioner. The cabin air filter needs to be replaced when it’s dirty. If you don’t it’ll start to smell. Not all vehicles have one, so ask your Eurobahn service advisor to check your cabin air filter at the same time they’re doing your air conditioning service.

Categories
bmw bmw dealer bmw parts Greensboro NC Service

BMW Brake Repair Tips – BMW Greensboro, NC

BMW Auto Brake Repairs

brakerepair

Heed these tips and you’re on your way to ensuring your BMW brakes won’t fail:

Repair Tip #1: Keep the hydraulic reservoir at the proper level with the fluid type recommended by BMW. Never substitute or mix types of fluid. Remember also that hydraulic fluid absorbs water. Never use old hydraulic fluid – always use a fresh container.

Repair Tip #2: Keep brakes clean by washing them off at the same time as your car. This keeps squeaky dust and dirt off the pads and makes brakes easier to inspect and work on.

BMW Service Tip #3: Never spray, touch or drip any oil or lubricants on the brake friction surfaces. If this occurs, spray immediately with brake cleaner to remove completely

BMW Repair Tip #4: There are no shortcuts or quick fixes to brake problems. They either function properly or they don’t. Know your brake system – how it should work, feel and sound – before it acts up so you’ll know when something’s wrong.

BMW repair Tip #5: Most imports don’t have serviceable rotors. They must be replaced at the same time as the pads. The rotors cannot be “turned” to remove imperfections. There isn’t sufficient metal thickness to safely accomplish this.

 BMW Repair Tip #6: Keep a repair log with receipts when any service is performed on your BMW. It helps when you need to check if your warranty is still in effect. More importantly, it’s a great gauge of performance and an indicator of other problems.

 Repair Tip #7: Whenever the pads are replaced, the hydraulic system must be bled to remove any air bubbles. Most BMW specialists recommend changing the fluid with every pad replacement. If you’re unsure of the proper technique for bleeding the hydraulic system, don’t perform the job yourself. Seek help from a BMW Greensboroprofessional. ABS equipped cars should be bled only by professionals.

 Repair Tip #8: Most noises are usually related to your pads. However, whenever replacing pads, you should also replace the sensors and seriously consider replacing the rotors at the same time.

Repair Tip #9: After installing new pads, remember to “set” them properly. This conditions them for maximum performance and prevents premature failure. Instructions for setting pads are usually provided in the package with your new pads.

Brake Parts Shopping List

When shopping for BMW brake parts, remember two important things:
1. OEM/OES (original equipment manufactured/supplied) or equivalent pads and rotors are not always cheap. You do, however, get what you pay for. OE parts will give you the most trouble-free driving and peace of mind. And . . . isn’t that what’s most important?

2. Before requesting any brake parts for your BMW, make sure you have the year, exact model designation, engine size and type, brake configuration, type of rotors (solid or vented), vehicle ID number (VIN) and production date. For Volvos, you’ll also need rotor diameter, caliper manufacturer and mount and shape of the pads.

Here is a list of parts you should consider when working on BMW brake systems:

  • Front Brake Rotors (Brake Discs)
  • Front Brake Pads
  • Rear Brake Rotors (Brake Discs) or Rear Brake Drums
    Rear Brake Pads or Brake Shoes
  • Brake Sensors (front and/or rear, as applicable)
  • Brake Calipers or Caliper Rebuild Kits
  • Wheel Cylinders
  • Hydraulic Hoses
  • Hose/Tube Fittings
  • Brake Master Cylinder
  • Power Booster
  • Reservoir & Grommets
  • Brake Proportioning Valve Assembly
  • Hydraulic & Brake Fluid
  • Brake Cleaner
  • Anti-Squeal Compound
Categories
Audi bmw Porsche Service

Why do Cup Holders Break so Easily?

Why do BMW cup holders break so easily?  We love BMW’s but its no lie that they can be very flimsy and break so fast. At Eurobahn Motorsports we stock OEM parts and are happy to replace your cup holder. We will install your cup holder so you no longer have to throw out your drink before you get into your vehicle.

We have a Huge stock of manufacturer parts, We have great cup holders for your vehicle! Reasons why you should order a cup holder from us:

2013-BMW-X1-cup-holder

  • It folds out of the way completely when not in use.
  • It is adjustable and holds almost any drink size… from an aluminum can up to a 7-Eleven Super Big Gulp.
  • Secure gripping arms keep drinks from spilling even with spirited driving.
  • Installation is easy and non-damaging to the interior… simply use the self-tapping screws to attach to the carpet (as shown).  If you wish to remove the cup holder, no visible marks remain.
  • Durable construction, does not break easily.
  • Basic textured black surface is an excellent match for BMW dashboard material
  •  It’s really affordable!
Related articles
Categories
Audi bmw Porsche Service

Interior Restoration- Audi, BMW, Land Rover, Mercedes-Benz, MINI, Jaguar, Sprinter Van, and Volkswagen in Greensboro, NC

Interior Restoration

interior

Rebuilding a seat after the materials have workout their useful life is dependent on the purpose and intent of the seat itself. Remember, you are going to use that seat every time you get in your vehicle, might as well make it comfortable. At Eurobahn Motorsports we specialize in Interior Restoration.

Materials have improved dramatically, the cushions in the seat bottom are now built not only to be soft and comfortable, also to withstand the extreme temperatures and differences in size / weight of its occupants. Replacing a seat cushion with one that is more your liking is a complex decision.

This is where experience in replacing many seat cushions and using a variety of materials matters. We choose materials based on their ability to reach a high standard so that they will do what they say they will for a long time. Some people want more support in the sides, while wanting it to be easier on your bottom, this is where we have knowledge to share and explain how it will be different than the material used at the factory.

Walking a customer through all the variations of materials underneath the actual cover is not a phone conversation or email away, we could do it that way, but and we mean but, our goal is to deliver you what you want. So, a face to face discussion is our best bet to deliver quality. Picking out materials for the performance underneath is where we have the edge in providing lasting results.

Understanding how to correctly take apart is seat and be able to replace, fine tune, add/subtract material, and then cover it with material so that it has the right look and feel is not a textbook process, so when you do get your car back and it delivers the performance you expect, looks better than OEM, you know you got your monies worth.

Don’t forget the expectations from your automobile manufacturer, they have strict requirements of ‘how’ a seat is put together to ensure that it will perform properly in the event of an impending accident. We are certified and will return your interior to OEM specs for safety reasons, it is the right thing to do.

Categories
bmw

Your Independent Certified BMW service repairs and BMW maintenance in Greensboro, High Point, and Winston-Salem, NC.

A Little Information About Your BMW

BMW M3

What can we say about BMW that hasn’t already been said? It is the perfect combination of style and performance. The BMW has secured its place as one of the most popular European luxury cars in the market.

If you are taking you BMW to the dealership for all your service, maintenance and repairs, STOP! You are probably paying too much and your BMW probably isn’t getting treated with the respect it deserves. Eurobahn Motorsportsw is fully equipped to handle all your BMW needs. Our top-notch facility has the latest in dealer diagnostic equipment and our ASE and Bosch certified technicians have an extensive bank of knowledge when it comes to BMWs. They are trained to handle a wide range of BMW models, both old and new. Call us today to learn more about the services Eurobahn Motorsports has to offer.

With proper maintenance, BMW owners will be driving their luxury import car through 100,000 miles and past 200,000 miles. Maintaining your BMW makes a world of difference for proper preparation for seasonal changes.

BMW Scheduled Maintenance is designed to give your vehicle maximum car safety, reliable transportation and minimization of breakdowns from wear-and-tear at the lowest cost.

Need BMW Parts?

Tips To Save On Gas With Your BMW

  • Avoid Heavy Acceleration
  • Avoid Heavy Braking
  • Use Good Engine Oil
  • Regular Tune-Ups
  • Change Engine Oil For Scheduled Mileage
  • Proper Tire Pressure (Need tires for your BMW? Click Here.)
  • Use Fuel-Efficient Tires
  • Check Air Filter
  • Drive Speed Limit for Highway

Scheduled Maintenance Intervals For BMW

For Models Later Than 1999

  • 15/45/75/105/135/165/195/225 Miles (In Thousands)
    • Intermediate Oil Change
  • 30/90/150/210 Miles (In Thousands)
    • Inspection I
  • 60/120/180/240 Miles (In Thousands)
    • Inspection II