Month: October 2018

Categories
bmw BMW repair

4 Top Reasons for a BMW Engine Overheating

bmw engine

Owning a BMW is like a dream come true. For many, it remains only a dream, while in a few cases, the dream gets fulfilled. Now just imagine how annoying it could be when you are driving to attend an urgent meeting only to encounter overheating under the hood. Let’s find out some causes of engine overheating.

Auto Body Shop Greensboro for BMW Service

Coolant Leak

Your BMW’s engine should treated with coolant in order to keep the temperature of the engine in check. The summer season takes a toll on the engine, causing a coolant leak. Air enters into the system through the leak, creating a pocket of air that affects the coolant flow. Inadequate coolant flow or coolant leaks are major signals of engine overheating. To be more specific, without coolant, the engine fails to maintain its optimal temperature, notes BMW service Greensboro expert.

Clogged Cooling System

As stated before, when coolant fails to properly flow through BMW’s engine, a temperature malfunction arises. A clogged cooling system is the result of one of the few causes such as, a malfunctioning thermostat, debris, or natural buildup. A contaminated cooling system cannot help circulate the coolant, leading to the overheating of the engine.

Wrong Type of Coolant

Believe it not not, the types of coolant required vary from car to car. More so, what type of coolant you will need particularly depends on what type of conditions you are in. For BMW, you will need a specific type of coolant. Hence, it is important to choose the right type of coolant for your engine, for the viscosity must match or you might land up with overheating issues. To gather more knowledge on it, be sure to go through your owner’s manual. In case you are not unable to understand it, contact the manufacturer directly. BMW makes its own brand of coolant as well, which one might consider buying.

Water Pump Failure

According to body shop Greensboro experts, the water pump is a vital part of the cooling system. The pump is what helps keep the circulation of coolant in tact, when it begins to show signs of wear, therefore, should be replaced to avoid overheating. Procrastinating with the process of replacement means you are sure to encounter overheating.

Categories
Mercedes-Benz

More About Mercedes Benz Tires – All Season, Summer and Winter Tires

Mercedes Benz Greensboro Tires

So, your tires are under-inflated. Driving a car with worn out tires is really dangerous. If the tire pressure is too low, chance of friction is way high on the road. Increased friction can lead overheat which can cause premature wear, tread separation, and blowouts. To find yourself on the safe side on the road, choosing the right tire for your vehicle is mandatory.

Mercedes-Benz Tires Greensboro NC

You’ve got plenty of options in Mercedes-Benz Greensboro NC, but unless you’ve got an off-road rig, your decision will likely boil down to three basic choices: summer, winter, and all season tires.

Summer Tires:

Usually summer tires are the best fit for the warmer weather. Made from softer rubber compound, they are typically fitted with large tread blocks to offer maximum contact with the road in summer season. These tires generally come up with more grip in both wet and dry conditions and are widely known for optimal cornering and braking capabilities. However, as winter approaches, the performance of these tires get affected, with cornering performance greatly impaired and traction remarkably suffers.

About Mercedes Benz Tires

Winter Tires:

As the temperature drops below 45 degrees, the car should be treated with a set of winter tires. These tires are manufactured with a deep tread pattern and a series of very thin cuts called sipes across the tread. The deep tread can help push excess slush buildup, while the sipes are built to provide extra grip on snow and ice. The rubber used in winter tires are typically designed to provide more grip on cold, dry road. No matter you experience snow regularly or not, winter tires are still your best bet when temperature drops.

All Season Tires:

The vast majority of new cars that arrive at dealers come equipped with all-season tires. The biggest advantage of using this tires is that they can perform adequately on dry or wet roads or roads that have a light snow. However, unlike summer tires, they do not have the handling and grip levels. They may last longer than summer or winter tires, and are able to tread on ski slopes. however, they won’t stop and corner as well as winter tires can when the weather turns cold. In short, they are the “jack of all trade, but master of none”.

Now, what you want to buy depends on your budget, convenience, and the worst-case scenario. Figure out how much money you can spend. Purchase tires to accommodate those factors. Bring your vehicle in for tire inspection and tire rotation at Mercedes-Benz repair Greensboro NC auto body shop.

Categories
Audi Uncategorized

Your Reasons To Trust a Local Audi Repair Greensboro NC Shop

Local Audi Repair Greensboro NC

If you own an Audi, you will probably know the pain of seeing a small scratch or a dent on its body. Audi is a perfect example of a vehicle that brings together style, comfort and sophistication. That gives you reason to take your Audi to the best Audi Greensboro dealership for repairs. Many will opine that it is best to get the vehicle to a licensed Audi repair shop. But, there is a difference of opinion among Audi owners when it comes to this. Many think that even the local shops are great when it comes to Audi repairs.

What makes the local shops a good choice for Audi owners?

Following are some good reasons for considering a local Audi repair Greensboro NC.

You can look out for personalized service

Any local Audi repair shop will give that extra care to your vehicle that the dealerships might not provide all the time gie that they are always busy with other clients. An independent local Audi repair shop also houses experienced Audi technicians who has the time and patience to listen to all that a carowner has to say. They will offer a personalized service that guarantee that all repairs and maintenance work is carried out on time.

They Provide Warranty As Well

It is a misconception among many Audi owners that they will not be able to make the best of their warranty if they don’t get the vehicle serviced at the dealerships. But that is not true at all. Even local Audi repair shops comply with the carowners warranty and all repairs and maintenance are covered under the same.

A Local Shop Is Well-Equipped Too

There is no reason to think that the local independent Audi repair shops will not be able to handle the Audi issues as they will not have the apt equipment. That is wrong again. Until you drive-in the Audi to such a local repair shop, you will not be able to understand that they are all prepared to provide you with an excellent experience. The technicians follow all the latest technology and are skilled to handle all the tools required for the repair job.

There is no harm in trusting a local Audi repair shop for doing the job. There too, your Audi will be treated with care.

Categories
BMW service

How Do You Go About Dealing With Foggy Headlights in Your BMW

BMW service Greensboro

If you are driving a BMW, then you should be very careful of keeping every inch of it clean. Performance and aesthetics are the two primary reasons for why everyone wants to be a proud owner of a BMW. The driving experience in a BMW is unmatchable but who wants to drive such a beauty with foggy headlights? As the owner, it is your duty to get the car headlights all shiny and bright. You can always take your car to the nearest BMW Greensboro service shop, but sometimes it is a lot easier to get the headlights all fixed up yourself.

There are some reasons why the headlights of a BMW gets foggy. If the issues are known, then it helps to get them treated at the earliest. The many reasons for the headlights getting foggy are as follows:

  • Year and model of the vehicle
  • Age of the vehicle
  • How the vehicle is handled, and in which conditions
  • Lack of maintenance
  • Exposure to the harsh and harmful UV rays
  • Exposure to moisture

Once the reasons are identified, the next step is to consider how to keep them as good as new. If the condition of the headlights have deteriorated to a great extent, then there is no way other than replacing them altogether. Thorough cleaning does ot fail to work everytime and needs to be followed thoroughly. One point is however to be noted, and that is, replacing the headlights is a costly affair and often depending on the make and the model of the BMW, it will be hard to get an exact replacement. All those hassle and other costs can be cut down or completely avoided with some care. There are some simple ways to keep a costly BMW service Greensboro away from you.

  • Clean the headlights from time to time
  • Keep the car in a covered garage
  • Let technicians handling BMW servicing take care of the same
  • Do not use sub-standard cleaning products
  • Use only the best replacement parts for your BMW

Your BMW is a costly piece of car and losing or damaging it for foggy headlights is not a wise idea. As a carowner, your responsibility is not just to get the car and drive it around. You should also take good care of the same as well.

Categories
BMW repair

How to Take Care of the Oil Cooler Gasket in BMW 6 Series

Oil Cooler Gasket BMW 6

The BMW 6 Series includes a good number of amazing cars that enhance the integrity of the BMW brand and assure the drivers an outstanding, luxurious driving experience. With innumerable changes and tweaking having been made to the multiple generations of 6 series cars, these iconic vehicles turn out to be even more efficient, reliable, and consistent performance-wise. However, these cars have been identified with typical performance issues that were not addressed by the manufacturer adequately. Therefore, it is important to to be aware of these issues and treat the vehicle with right BMW service.

One issue that many car owners complain is oil cooler gasket failure. Diagnosing such issues in your car is helpful so that you and your automotive specialist can act preventively. In this article, we’ll go over some basic information about what the oil cooler gasket does for your BMW and how you can maintain it in your own 6 series.

What is the Main Function of the Oil Cooler Gasket?

Remember oil and the other components within the oil system are essential to the BMW’s function. In 6 series cars especially, oil cooler gaskets can lead to serious performance issues. The engine oil must be cooled before it can properly lubricate the various components of the engine. In order for the oil to be adequately cooled, it must be contained within the system. If the oil cannot be contained properly, the whole system will fail to promote the flow of proper-temperature oil through the engine, causing parts to grind together and corrode quickly.

BMW 6 Greensboro

What to Expect if the Oil Cooler Gasket Fails?

It is important to note how your 6 series is performing on regular basis, for you can only find when there is something impacting on your BMW’s performance. It is essential to be aware of certain signs of oil cooler gasket failure that you should be aware of and anticipate, especially since 6 series cars are more prone to this issue.

  • Shifts in Engine Temperature
  • Leaking Engine Oil
  • Diminished oil quality

How to Maintain the Oil Cooler Gasket?

The BMW 6 series is the epitome of luxury and elegance, as well as high performance standards and quality automotive experiences. When it comes to maintaining oil cooler gasket, it is imperative to bring your car in for quality BMW Service Greensboro NC as soon as possible. It is essential to prevent engine failure for preserving the quality of your vehicle, and it’s the job of the experts to maintain your car’s performance.

Categories
volkswagen volkswagen greensboro

Latest Upgrades on Volkswagen Golf Engine for 2019

2019 Volkswagen Golf

Volkswagen may have invigorated its Golf lineup, including the SportWagen station wagon and Alltrack crossover, in 2018, but that doesn’t mean the German automaker doesn’t have any additional traps up its sleeve.

Volkswagen declared a number of changes for the Golf as it enters the 2019 model year. The most striking distinction is the introduction of another engine. All front-wheel-drive Golf variants, including the SportWagen, will come equipped with the 2019 Jetta’s 1.4-liter gas I4. It produces 147 horsepower and 184 pound-feet of torque. It comes paired with a six-speed manual or another eight-speed automatic.

This just applies to FWD Golfs, however. All-wheel-drive variations, including the AWD SportWagen and each trim of Alltrack, will proceed with Volkswagen’s 1.8-liter I4. This engine can likewise be paired with a six-speed manual, however purchasers can settle on a six-speed dual clutch transmission they choose to.

According to the Volkswagen Service experts, The base S trim for the five-door Golf and Golf Alltrack currently comes up with forward collision warning, automatic emergency braking and blind spot monitoring as standard gear. It’s as yet discretionary on the SportWagen. Estimating for the Golf begins at $21,845 for the hatchback, $22,995 for the SportWagen and $26,895 for the Alltrack.

Special-edition GTI, plus more power

Volkswagen Golf Engine

VW’s mid-level hot hatch GTI additionally receives a couple of enhancements. All models currently include 228 torque, a 8-horsepower bump over a year ago, notwithstanding Golf R brakes and a mechanical differential. The S trim has a discretionary bundle that includes forward collision warning, automatic emergency braking and blind spot checking, but it’s standard on every other trims. The mid-level SE trim currently receives leather seats and discretionary versatile dampers.

There’s additionally another throwback trim. The GTI Rabbit Edition is a constrained run trim that includes 18-inch dark combination wheels, a black spoiler, black mirror tops, adaptive LED headlights and keyless access. Inside, there are Rabbit labels on the seats and floor mats with red sewing. It comes in only four hues: Blue, dim, white and dark.

Almost every 2019 Golf variation utilizes the new 1.4-liter engine, including the Golf hatchbacks and front-wheel-drive variants of the Golf SportWagen. The main Golfs that keep the old 1.8-liter engines are wagons outfitted with VW’s 4Motion all-wheel drive and the all-wheel-drive-just Golf Alltrack.

The Alltrack’s best SEL trim level, already automated just, is currently offered with a six-speed manual, as well. Beyond their engine bays, the 2019 Golfs receive more standard dynamic security features alongside a slight increase in price.

Over the car is impressive. To keep the engine in good shape, bring it in at Volkswagen Service Greensboro center for routine maintenance and tuneups.

 

Categories
Range Rover

How to Upgrade 2003-2004 Range Rover Back Camera

2003-2004 Range Rover Back Camera

If anything goes wrong with the existing camera system, it could be easily replaced with a brand new system at no cost. This article is intended to give a complete know-how on installing a reverse backup camera that operates automatically when one puts one’s Range Rover in reverse.

The best thing about this replacement is that you don’t need any tool to operate this. All you need is certain level of knowledge and skill, and the job is done. You can also take advice from the Land Rover Greensboro experts.

First Step:

  • In the Range Rover 2003-2004, a reverse backup camera can be connected with the television module providing you with full backup camera function on your Range Rover Display.
  • Make sure that the car is equipped with BMW TV video module. If not equipped, be sure to retrofit Range Rover Television module. Search in Google: retrofit range rover television module — for available options.
  • Backup Camera Automatic Switching Requires a reverse camera switching module kit, and a NTSC reverse camera mounted in any location desired.

Second Step:

  • Fix switching module BLUE wire into Pin 17 on the BLUE plug on your TV video module.
  • Move the Black Locking lever to the side on your TV video module to turn loose the Blue plug.
  • Detach the cover of the blue plug by gently rasing the cover locking tab with the help of a small screw driver. Then slip the cover off.
  • Thrust the BLUE pin into the Pin location 17. A close look will reveal the number 18 on the black part of the plug. Pin 17 would be the next pin location over.
  • Also remember: if your camera switch module has an extra wire in the center marked 87a, it is not attached anywhere. Remove this extra wire, if present.

Third Step:

  • Attach the RCA connectors that come with the Reversing Camera Switching module with the white plug.
  • Take the cover off of the white plug as mentioned.
  • Fix the colored wire on the RCA Plug into the White plug Pin location 13
  • Plunge the BLACK wire on the RCA Plug into the White plug Pin location 14
  • Look for wiring diagram for reference

Forth Step:

  • Lodge your Reversing Camera as per the specifications outlined by the Camera supplier.
  • Make the RCA Camera Output (MALE RCA) connected with the Reversing Camera Switching module RCA Video input cable (FEMALE RCA)

This simple guideline will help you upgrade the camera system of your Range Rover. However, if you fall short of confident, be advised to hire Land Rover service to get the job done.