Categories
Greensboro Land Rover Land Rover Repair Land Rover Service NC Range Rover Service

Land Rover Service Greensboro, NC – Land Rover Engine Cooling Problems

Land Rover engine cooling problems are becoming more common. Both the engine and the pocketbook feel the effects of ignoring the warning signs of overheating. Because Land Rover engines are mostly aluminum, they are quickly damaged by excess heat, even if driving only a short distance when the temperature gauge is in the red. Instead of taking your vehicle to land rover greensboro nc and paying high dealer prices, Bring it to Eurobahn Motorsports!

Land Rover Engine Cooling Problems- Greensboro, NC
Land Rover Engine Cooling Problems- Greensboro, NC

Overheating and Engine Damage
Here is some information about land rover repair greensboro nc : Some automotive experts consider that the problem begins on the production line. As tooling equipment becomes worn, the tolerances between the aluminum engine block and the steel cylinder liners are less precise. This problem is compounded by significantly higher engine operating temperatures resulting from an increased displacement for more power, and the newer high efficiency fuels.

Engine failures become apparent when the engine creates enough heat to cause thermal expansion that loosens the liners in the engine casting. Increasing numbers of Land Rover engine failures are attributed to overheating. It may be possible to keep problems at manageable levels if the engine is never allowed to overheat.

Land Rover Service Center in Greensboro, NC
Land Rover Service Center in Greensboro, NC

Preventive Approaches
Regular land rover service greensboro nc maintenance is critical to prevent overheating problems. Here are common preventive and corrective maintenance tips:
• Be sure the radiator is full of clean and appropriate coolant; using the wrong coolant results in sediment and even corrosion
• Do not drive with low coolant
• Check all hoses for leakage
• Flush the radiator and replace coolant every 30,000 miles, as recommended by Rover
• Be sure the fan belt is tight; a loose belt might mean a failed fan clutch or water pump
• Ensure fan blades are in good condition and that the fan shroud is in place
• Make sure the radiator cap and the thermostat are working properly
• Check that a clogged catalytic converter is not causing heat buildup

Most importantly, never drive this vehicle with an overheated engine. Pushing the limit can result in engine failure and very costly repair bills. Basic maintenance and attention to changes in performance can prevent Land Rover engine cooling problems. If your Land Rover is experiencing overheating issues bring it in and let our ASE certified technicians take a look at it. We will get you up and back on the road in no time! Eurobahn is your land rover service repair center greensboro nc . Contact Us today!

Categories
bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC

BMW Repair Greensboro NC | BMW Electrical Problems

BMW might make great vehicles, but this does not mean that the vehicles are always without problems. BMW electrical problems have actually become fairly common over the last few years, with two recalls taking place in the last three years. If you are driving a BMW 3 or 5 series, you might want to consider the issues that are being reported. We are your BMW Greensboro NC electrical problem solvers, and you can rest assure knowing you’re in good hands with our service adviser.

BMW Electrical Service in Greensboro NC
BMW Electrical Service in Greensboro NC

The latest of the BMW electrical problems has hit the 2008-2010 5-series models. An electrical connection issue exists that can cause a failure of power to the brake lights, turn signals, back up lights and even the rear tail lights in the vehicle. This can lead to dangerous driving conditions on the road—after all, other drivers may not be able to tell when you are signaling, breaking or even if you are on the road at night. More pressing is the very real possibility of being pulled over by the highway patrol for having defective equipment. Instead of paying high dealer prices at BMW of Greensboro NC and bring your car to an Independent Repair Facility, we have state of the art equipment and BMW Certified Technicians.

More serious are the electrical problems with the BMW 3-series. We are happy to help you with BMW Repair Greensboro NC electrical problems at Eurobahn. While the issues with the 5-series might get you a ticket, the electrical problems present with the 2007-2011 3-series might leave you stranded. The reason for these BMW electrical problems actually has to do with a faulty battery cable connection. Because there is an issue with the connection between the cable and the fuse box, the connection will degrade over time. This can lead to a lack of electricity being delivered to the engine, causing the vehicle to stall out. This, in turn, increases the risk of a crash.

If you are dealing with BMW electrical problems in the Triad area, don’t wait to get the issues fixed. Eurobahn Motorsports can deal with these electrical issues and get your BMW back to driving shape. BMW electrical problems have become more common over the last few years, but our ASE certified technicians here Eurobahn Motorsports can help with these issues quickly and effectively. Call us today to schedule an appointment at BMW Repair Service Greensboro NC  336.542.3555

Categories
bmw BMW Greensboro bmw parts BMW service Greensboro NC Service

BMW Service Greensboro NC | Prevent BMW From Burning Oil

At around 80,000 miles, all BMWs start burning oil and may encounter compression problems, or “burned valves”. Eurobahn is your BMW Greensboro NC Service Center and Valve jobs involve removing the engine’s cylinder head(s), so that the guides, seats and valves can be refurbished. This allows oil control and compression to be restored.

Usually, valve train jobs begin by dismantling, cleaning and examining the cylinder head. Heads made from cast iron are “magnafluxed”, to search for hairline cracks. Magnafluxing involves sprinkling iron powder onto the head, whilst exposing the head to a powerful magnetic field simultaneously.

BMW Service Greensboro NC
BMW Service Greensboro NC

 

Usually, valve train jobs begin by dismantling, cleaning and examining the cylinder head. Heads made from cast iron are “magnafluxed”, to search for hairline cracks. Magnafluxing involves sprinkling iron powder onto the head, whilst exposing the head to a powerful magnetic field simultaneously.

After the head has passed this inspection, it is examined for flatness. Undue roughness, warpage or other damage could make the head gasket malfunction. Should the head exceed the maximum permissible out of flatness specifications, it has to be replaced or resurfaced.

       Eurobahn Motorsports is able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional BMW Service Greensboro NC dealership repair shop.

Now, attention turns to the guides, seats and valves. The guides are inspected for wear, and they are virtually always worn. Hence, they have to be either relined, knurled (where the bore size of the guides is reduced, by cutting grooves into the guides’ interior diameter) or replaced. The cylinder head seats are either ground or cut, to repair the sealing surface.

Prevent Your BMW Burning Fuel

Each valve spring is examined and tested to ensure that it is still able to maintain the correct pressure. The keepers, spring retainers and other components are examined as well. Any damaged or worn hardware is replaced. Then, the valves are fitted into the head and leveled to restore the correct valve height.

Prevent Your BMW Burning Fuel
Prevent Your BMW Burning Fuel

Whereas every dealer repair shop performs all of these steps, they do not do so as affordable as a certified repair shop. Having the engine valve train conditioned can cost your pocket book quite a bit, however before you write a check or scan a credit card contact an independent certified BMW Repair service Greensboro NC center like Eurobahn Motorsports. We are able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional dealership repair shop.

 

Categories
bmw BMW Greensboro bmw parts BMW service Service

BMW Service Greensboro NC | BMW Suspension System Repair

Your BMW’s suspension system is an intricate network of cooperating (usually, anyway) components designed to give you a smooth, even, stable ride. Since the suspension is ground zero when it comes to road abuse, the parts wear out, and even break. If your car doesn’t seem to ride like it used to, you may have a problem down below.

BMW Service Greensboro NC
BMW Service Greensboro NC

If your BMW is experiencing any of the following, bring it to Eurobahn Motorsports BMW Greenboro NC for a professional diagnostics and BMW repair:

If your BMW is Pulling to One Side While Driving.
Flip-flop wheel shimmy. Wheels seem to wander and wiggle rapidly back and forth.
Porpoising over bumps or uneven roads. Porpoising, aka bouncing, dipping, diving. Car keeps going up and down after you go over a bump.
Steering seems to be slipping. As you turn the wheel or hold it in a turned position, it feels like its slipping slightly back and forth.
If its Hard to steer your BMW and the wheel is hard to turn, especially while moving at slow speed, then it needs BMW repair service Greensboro NC .
Steering wheel vibrates at speed. Excessive vibration while traveling a constant speed, especially highway speeds.
Loose or sloppy steering. Steering has excessive play and wanders from side to side.
Clunking over bumps. Feeling clunks and knocks through the steering wheel when you go over bumps or even cracks in the road.
If your BMW is Screeching and screaming it needs to be taken to Eurobahn’s BMW Service Center Greensboro NC Steering emits loud screeching when steering at low speeds, such as parking.

At Eurobahn Motorsports we have Factory Trained BMW Service Technicians so we are your choice for BMW Repair Greensboro NC . Schedule Your Appointment with US Today!

Categories
BMW Greensboro bmw parts BMW service Greensboro NC Porsche Service

BMW Recommended Service Intervals- Greensboro, NC

Most people in the Triad area are aware that automotive manufacturers have recommended service intervals. Following recommended service intervals is very important. The engineers that design our vehicles have tested the various systems and components to meet durability and safety standards.

BMW-MINI Mercedes-Benz & Audi Schedule Service Intervals
Schedule Service Intervals

The maintenance schedules are designed to achieve the standards. Think of the benefits of following recommended intervals as falling into three general categories: Protection, Efficiency and Safety.

Protection. Let’s start with motor oil. First of all, the engineers recommend a particular weight and type of motor oil for your sedan. All of their oil change recommendations assume using the proper motor oil. Motor oil contains detergents and other additives that clean the engine and provide corrosion resistance. Over time, the additives are depleted. The oil also becomes contaminated by water, dirt and combustion gases.

Extending your interval beyond the recommendation means that your sedan engine will be operating without the full protection of fresh motor oil. It also means that sludge can form in contaminated oil and clog up passages in the engine, starving parts from needed lubrication.

Efficiency. Some services are designed to keep automotive systems operating efficiently. For example, the fuel system gets clogged up with gum and varnish from the fuel. Fuel doesn’t flow efficiently which reduces fuel economy. A fuel system cleaning restores the fuel system’s efficiency and increases your gas mileage.

Safety. Your brakes are obviously one of the most important safety systems on your sedan. The manufacturer has scheduled brake pad replacement as well as power brake fluid drain and replacement intervals. Because brakes are so important, a brake inspection is also on the schedule to head off problems before they result in an accident.

Check your owner’s manual for recommended service schedules or talk with an Expert service advisor at Eurobahn Motorsports by calling 336-542-3555. You’ll find our shop located at 303 S. Swing Rd, Greensboro North Carolina, 27409.

You may be surprised to learn that various inspections may be on your list of factory recommendations for your sedan. These inspections are usually at major intervals like fifteen or thirty thousand miles. They’re designed to uncover important parts that may be close to failing.

Your sedan owner’s manual can tell you when to change your oil, but it can’t tell you that you have a radiator hose that’s bulging and about to burst. For that you need a trained auto technician. These scheduled inspections are in addition to the multi-point inspections done with a full-service oil change.

 

Categories
Audi bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC Service

Replace Your Wiper Blades- Greensboro, NC

Having a good pair of windshield wipers is extremely important. We’ve all experienced the frustration and fear of not being able to see clearly during a storm, or when our windshield is just dirty.

BMW windshield wiper

It seems like your wiper blades are always at their worst when you need them the most. But windshield wipers are like most other vehicle parts– they require regular attention in order to work their best.

You really ought to replace your wiper blades twice a year; in the spring and the fall. If it’s going to be a particularly harsh winter in Greensboro, you may even want to get special winter blades in the fall. Winter blades are designed to resist freezing.

Speaking of winter and freezing conditions, if your car has been sitting for a long time and the windshield becomes frozen, don’t use your wipers to clear off snow and ice. That’ll just tear up the blades and cause them to wear out more quickly. It may even damage the wiper motor.

Over time, wiper blades become hard and brittle, and then tear. They also lose their flexibility and just don’t cover the windshield effectively.

Worn wiper blades aren’t just a safety hazard; they can also scratch your windshield. That may require replacing the entire windshield; a big cost for such a little part.

Replace worn blades right away. Your local service center can provide you with a quality replacement blade. They cost about the same as they would at the store; but installation is included at Eurobahn Motorsports.

Of course you also need washer fluid to help your blades do their work. Even though your local Greensboro service center will top off the washer fluid with a full service oil change, it is a good idea to have some extra fluid at home, or in the car if you are on a long trip.

Always use windshield washer fluid. Plain water, even that fancy bottled water, may freeze in the fluid reservoir or on the windshield itself, making things worse. Besides, water won’t do a good job of cleaning your windows.

And remember that some vehicles have two reservoirs: one for the windshield and one for the back window – which may be under the hood or somewhere in the back. Schedule A service Today!

Categories
bmw BMW Greensboro BMW service Greensboro

Suspension Service in Greensboro, NC

When you hear the word ‘suspension‘, you may think back to those energetic days of grade school. Well, your car’s suspension is actually a good thing because it keeps your car up off the road and helps provide a comfy ride. It needs to keep your wheels firmly planted over bumps and through curves. Your suspension system has many parts. If you look under your car, it’s basically everything that connects your wheels to the car’s frame. These are heavy duty parts that do a lot of work. They need to be inspected for damage and excessive wear at least once a year. A good time for this is when you get your annual alignment service.

BMW Alignment Service Greensboro NC

Here are some warning signs that your suspension may have problems:

the car pulls to one side;

it wanders;

the steering is erratic;

you see uneven tire wear;

you experience a poor ride or handling;

you see oil leaking from shocks

. . . You just don’t feel in control when you’re driving.

Some suspension parts just wear out with use. Shocks and struts eventually lose their ability to control your ride. Wheel bearings need to be repacked every couple of years. And some suspension pieces need to be lubricated when you get your oil changed. Your service advisor at Eurobahn BMW Greensboro, NC can oversee an inspection and tell you what problems you may have.

If you’re in an accident, your suspension can be damaged or knocked out of alignment. Even a minor accident, like hitting a curb around Greensboro, NC or even a large rock can mess things up. With a minor accident it’s tempting to just get an alignment or wheel balance to correct the problem. But if there’s some damage, a simple alignment won’t actually fix the problem, and you’ll just have to align it again after the repairs are made. So if you have an accident, get your suspension system inspected right away. Suspension problems should be fixed immediately because they can lead to unsafe handling.

One big cause of suspension damage is potholes – those nasty magnets that seem to draw our tires right into them. Well, Here are some tips for avoiding damage from potholes: First, keep your tires at their full air pressure. That gives tires their maximum resiliency and will hopefully keep your wheels or other suspension parts from crunching on a big hole. Next, just pay attention. When you see a hole you can’t miss, slow down before you hit it. Driving at a slower speed will limit the damage, and may keep your drink from spilling. But don’t brake directly over the pothole. That will cause the car’s weight to shift forward and add to the potential damage. Schedule Your Appointment Today!

Categories
Audi bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC Porsche Service

Air Conditioning Service- Greensboro, NC

Warm weather or cold, North Carolina drivers still need to think about their sedan’s air conditioning. Most people don’t service their air conditioning until after it fails. At Eurobahn Motorsports, we can advise you on your vehicle manufacturer’s preventive maintenance schedules for BMW service, just as we do for transmission service, oil changes and so on.

BMW Air conidtioning

Maintaining your air conditioning system means that you always have enough refrigerant to properly do the job. Small leaks in the sedan’s air conditioning system allow the refrigerant to escape and the system can’t cool the air as well. We see that a lot at Eurobahn Motorsports in Greensboro.

The refrigerant also contains a special oil that lubricates air conditioning components, and keeps the seals resilient. Low refrigerant and lubricating oil means that the air conditioning parts will wear out prematurely, and all North Carolina car owners know that air conditioning repairs can be costly. At Eurobahn Motorsports BMW, we recommended that the air conditioner be run regularly, even during winter months, to keep the parts and seals lubricated.

BMW Air conditioning service at Eurobahn Motorsports starts with a visual inspection of the components for signs of damage or leaks. The compressor is driven by a belt from the engine, most often the serpentine belt, so it’s inspected for cracks or wear. The air conditioning compressor and other components are checked for proper operation. Then comes the leak test. If a leak is detected, often in a hose or connection, it’s repaired and the system is retested.

Then the old refrigerant is evacuated and the system is recharged with clean, fresh refrigerant. A final test insures that the sedan’s air conditioner is working, and you’re on your way.

How often this should be done varies from vehicle to vehicle. Your sedan owner’s manual will have the manufacturer’s recommendation and, of course, your Eurobahn service advisor can tell you. It’s typically every two years.

If you’re not getting enough cool air you know something’s wrong. Also, if you hear strange sounds when you turn the air on, there might be a problem with the compressor and you should get it checked out at Eurobahn. Replacing a bad A/C clutch in a sedan is cheaper than waiting for it to ruin the compressor.

BMW Greensboro drivers need to be aware that there’s one more thing that isn’t directly related to air conditioning service, but does impact the quality of the air in your sedan. And that’s your cabin air filter. This filter cleans dust, pollen, pollution and other impurities in the air that comes from the heater and air conditioner. The cabin air filter needs to be replaced when it’s dirty. If you don’t it’ll start to smell. Not all vehicles have one, so ask your Eurobahn service advisor to check your cabin air filter at the same time they’re doing your air conditioning service.

Categories
Porsche Service

Porsche Maintenance & Service Center- Greensboro, NC

A Little Information About Your Porsche
There’s no mistaking a Porsche when it passes you by on the road.

Porsche

Since the beginning, Porsche has been, and continues to be, an innovative innovator. Its styling, performance, safety and environmental innovations are a cut above the rest. Over the years, Porsche has set industry standards and broke industry records. It has a lengthy racing heritage with over 28,000 victories under its belt. Porsche is recognized as the world’s most successful brand in sports car racing and Eurobahn Motorsports specializes in Porsches.

We know how much our Porsche customers love their Porsches, which is why Eurobahn Motorsports offers a variety of specialty services to take your Porsche experience to the next level. If you are interested in fine-tuning your engine or upgrading to a turbo, Eurobahn Motorsports. is the first place you should visit. We have the best Porsche technicians on hand and the best part upgrades on the market. We are also the first place you should think of if your Porsche is in need of repair or maintenance. We’re one of the very select few shops in the Triad : Greensboro, Winston Salem, High point and Burlington NC areas that can work on both water-cooled and air-cooled engines. Don’t let just anyone work on your Porsche. Whether you’ve got a brand new 911, or a 1950’s bent window coupe, make Eurobahn Motorsports your Porsche headquarters.

Porsche is not only known as a luxury car, but a sports car and is even used for racing. It is important to keep up with regular maintenance on these powerful vehicles. Porsche may have been built for endurance and speed, but like every other car it is important to do regular check-ups and maintenance to keep your car running to its optimum performance.

Tips To Keep Your Porsche Running Smoothly
Check Tire Pressure and Tread
Check Fluid Levels
Regular Maintenance
Use Good Engine Oil & Filter for Oil Change
Check Battery
Check Brakes & Brake Fluid
European Vehicles

Bosch Authorized Service Center ASE Certified
Domestic & Japanese
We have technicians whose expertise is in one line of cars. On staff, we have different specialists for European, Japanese and GM automobiles.

In addition, we have the latest diagnostic equipment and factory information necessary to complete any repair job.

If you bring any of these automobiles to us, you can be assured that an experienced, certified professional will be working on your car.
We Honor All Extended Warranty Policies
Performance Upgrade Services for European Exotic Automobiles

Categories
bmw

Your Independent Certified BMW service repairs and BMW maintenance in Greensboro, High Point, and Winston-Salem, NC.

A Little Information About Your BMW

BMW M3

What can we say about BMW that hasn’t already been said? It is the perfect combination of style and performance. The BMW has secured its place as one of the most popular European luxury cars in the market.

If you are taking you BMW to the dealership for all your service, maintenance and repairs, STOP! You are probably paying too much and your BMW probably isn’t getting treated with the respect it deserves. Eurobahn Motorsportsw is fully equipped to handle all your BMW needs. Our top-notch facility has the latest in dealer diagnostic equipment and our ASE and Bosch certified technicians have an extensive bank of knowledge when it comes to BMWs. They are trained to handle a wide range of BMW models, both old and new. Call us today to learn more about the services Eurobahn Motorsports has to offer.

With proper maintenance, BMW owners will be driving their luxury import car through 100,000 miles and past 200,000 miles. Maintaining your BMW makes a world of difference for proper preparation for seasonal changes.

BMW Scheduled Maintenance is designed to give your vehicle maximum car safety, reliable transportation and minimization of breakdowns from wear-and-tear at the lowest cost.

Need BMW Parts?

Tips To Save On Gas With Your BMW

  • Avoid Heavy Acceleration
  • Avoid Heavy Braking
  • Use Good Engine Oil
  • Regular Tune-Ups
  • Change Engine Oil For Scheduled Mileage
  • Proper Tire Pressure (Need tires for your BMW? Click Here.)
  • Use Fuel-Efficient Tires
  • Check Air Filter
  • Drive Speed Limit for Highway

Scheduled Maintenance Intervals For BMW

For Models Later Than 1999

  • 15/45/75/105/135/165/195/225 Miles (In Thousands)
    • Intermediate Oil Change
  • 30/90/150/210 Miles (In Thousands)
    • Inspection I
  • 60/120/180/240 Miles (In Thousands)
    • Inspection II