Categories
bmw bmw dealer BMW Engine BMW Greensboro bmw parts BMW repair BMW service Greensboro

BMW Engine bed plate Replacement | BMW Service Greensboro NC

Eurobahn is your BMW Greensboro NC Service Center, No job is too big or small for Us!

Your BMW is serviced by a certified BMW specialist. Our resident Master Technician, Aaron, came across a great project recently where he had to pull the transmission out of a BMW 335i. 

Check out the pictures we took in the shop for a better understanding of how the process works.

BMW Engine Bedplate
BMW Engine bed plate

So the customer came in concerned about an oil leak, and we decided it was either the Rear main seal or the Engine bed plate because you cant tell which one it is without pulling out the transmission for sure. So we decided to do the Rear main seal because it was the most accessible, but the leak continued. So we removed the transmission, cleaned the oil and ran the car and found out it was the Engine bed plate leaking.

BMW W54 Engine
BMW N54 Engine

The BMW N54 engine commonly found in the 335i uses a bed plate design. This bed plate, which is basically a 2-piece engine block, is how BMW engineers were able to build a durable, and powerful engine. The 2-piece design is much stronger than the traditional 1-piece casting. Unfortunately in rare cases oil can leak between the 2-pieces — Which requires removal of the engine, and tear down of the bottom end to repair.

Bottom line, we got the job done and the customer left happy.  If your BMW is experiencing similar issues bring it in and let our ASE certified technicians take a look at it. We will get you up and back on the road in no time! Eurobahn is your BMW service repair center greensboro nc . Contact Us today!

Categories
bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC

BMW & MINI Greensboro NC Repair Services: BMW Parts

I know my BMW needs this part replaced. Can you do it?

OEM BMW PARTS
OEM BMW PARTS

You bought the part for your BMW you think needs replacing. We are your BMW Greensboro NC specialists. Are you sure you made the right diagnosis? In past years what typically happens, is that the first part brought in by the customer is not the correct part, or it’s an inferior quality that doesn’t fit correctly.

If the part is installed, then fails, now what? Was it the failure of the part or was in not installed correctly? And how much longer till the correct part is sourced by the customer and the process continue?

It’s is not a win-win for either the customer, the shop, or the tech who was trying his/her best to make it work and was getting frustrated in the process.

    Eurobahn Motorsports is able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional BMW Service Greensboro NC dealership repair shop.

Due to liability, warranty, counterfeit parts, the cost of operating a business, installing customer provided parts for their BMW is not a common practice in our area.

Eurobahn Motorsports is an independent BMW and MINI Cooper repair shop. Our specialists have the necessary tools and extensive BMW repair knowledge and experience to maintain your BMW or MINI to the highest standards.

Our BMW technicians will diagnose and explain why your car is having a problem. By maintaining your car, we will save you money on expensive emergency repair. No need to worry about your car – leave it to us.

Call us today to schedule an appointment at BMW Repair Service Greensboro NC  336.542.3555 or make an appointment online. Your car will be running like new.

Categories
bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC

BMW Greensboro NC | BMW Transmission Problems

BMW Repair Greensboro NC
BMW Repair Greensboro NC

On In recent times, BMW has announced the recall of thousands of its 7 Series and 5 Series cars for defective transmissions. While drivetrain issues have been detected on several Series 3 cars, the most glaring BMW transmission problems have been with the 7 Series, with over 45,000 units being recalled to replace their automatic transmission. At Eurobahn Motorsports we want to be your go to service advisor for any concerns about your BMW Greensboro NC. A brief overview of these problems reveals poor manufacturing and insufficient quality control as some of the high-level causes of these failures.

Rough downshift – One of the primary problems reported with the BMW 7 Series E65 and E66 has been the excessive amount of play and rough shifting between the 2nd and 1st gears while slowing down. Some owners have reported similar problems when rapidly shifting from the 2nd to 3rd gears. Mechanics and analysts believe that this problem may have less to do with sensors or the on-board computer but may be the result of a defective solenoid.

On-board Computer Defects – Another common issue with the BMW 7 and BMW 5 series is the failure of the on-board computer during gear changes or even when the car is started up for the first time. While DIY solutions such as unplugging and a manual reset of the computer have been recommended, owners are advised to contact us for BMW Repair Greensboro NC for a comprehensive diagnosis and solution to the problem.

It is highly recommended to have your car serviced by a certified BMW specialist before the problem turns into something more expensive.

BMW Repair Greensboro NC
BMW Repair Greensboro NC

Disengaged and Unresponsive Gearshift – One of the newer complaints about the BMW transmission problems is that the transmission disengages from a running gear into neutral or does not shift out of a specific gear—usually the 2nd or reverse gear. A defective gear selection switch or bad sensors are suspected to be the cause of these problems. To get this transmission issue fixed come to BMW service center Greensboro NC at Eurobahn Motorsports and our Factory Trained Technicians will take great care of you!

In increasing number of power train problems on account of inferior parts seems to be largely restricted to automatic transmissions although some manual transmission have reported similar problems that remain a concern for mechanics and customers alike. Call Us today to schedule a service appointment 336.542.3555

 

Categories
bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC

BMW Repair Greensboro NC | BMW Electrical Problems

BMW might make great vehicles, but this does not mean that the vehicles are always without problems. BMW electrical problems have actually become fairly common over the last few years, with two recalls taking place in the last three years. If you are driving a BMW 3 or 5 series, you might want to consider the issues that are being reported. We are your BMW Greensboro NC electrical problem solvers, and you can rest assure knowing you’re in good hands with our service adviser.

BMW Electrical Service in Greensboro NC
BMW Electrical Service in Greensboro NC

The latest of the BMW electrical problems has hit the 2008-2010 5-series models. An electrical connection issue exists that can cause a failure of power to the brake lights, turn signals, back up lights and even the rear tail lights in the vehicle. This can lead to dangerous driving conditions on the road—after all, other drivers may not be able to tell when you are signaling, breaking or even if you are on the road at night. More pressing is the very real possibility of being pulled over by the highway patrol for having defective equipment. Instead of paying high dealer prices at BMW of Greensboro NC and bring your car to an Independent Repair Facility, we have state of the art equipment and BMW Certified Technicians.

More serious are the electrical problems with the BMW 3-series. We are happy to help you with BMW Repair Greensboro NC electrical problems at Eurobahn. While the issues with the 5-series might get you a ticket, the electrical problems present with the 2007-2011 3-series might leave you stranded. The reason for these BMW electrical problems actually has to do with a faulty battery cable connection. Because there is an issue with the connection between the cable and the fuse box, the connection will degrade over time. This can lead to a lack of electricity being delivered to the engine, causing the vehicle to stall out. This, in turn, increases the risk of a crash.

If you are dealing with BMW electrical problems in the Triad area, don’t wait to get the issues fixed. Eurobahn Motorsports can deal with these electrical issues and get your BMW back to driving shape. BMW electrical problems have become more common over the last few years, but our ASE certified technicians here Eurobahn Motorsports can help with these issues quickly and effectively. Call us today to schedule an appointment at BMW Repair Service Greensboro NC  336.542.3555

Categories
Audi bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC Service

Replace Your Wiper Blades- Greensboro, NC

Having a good pair of windshield wipers is extremely important. We’ve all experienced the frustration and fear of not being able to see clearly during a storm, or when our windshield is just dirty.

BMW windshield wiper

It seems like your wiper blades are always at their worst when you need them the most. But windshield wipers are like most other vehicle parts– they require regular attention in order to work their best.

You really ought to replace your wiper blades twice a year; in the spring and the fall. If it’s going to be a particularly harsh winter in Greensboro, you may even want to get special winter blades in the fall. Winter blades are designed to resist freezing.

Speaking of winter and freezing conditions, if your car has been sitting for a long time and the windshield becomes frozen, don’t use your wipers to clear off snow and ice. That’ll just tear up the blades and cause them to wear out more quickly. It may even damage the wiper motor.

Over time, wiper blades become hard and brittle, and then tear. They also lose their flexibility and just don’t cover the windshield effectively.

Worn wiper blades aren’t just a safety hazard; they can also scratch your windshield. That may require replacing the entire windshield; a big cost for such a little part.

Replace worn blades right away. Your local service center can provide you with a quality replacement blade. They cost about the same as they would at the store; but installation is included at Eurobahn Motorsports.

Of course you also need washer fluid to help your blades do their work. Even though your local Greensboro service center will top off the washer fluid with a full service oil change, it is a good idea to have some extra fluid at home, or in the car if you are on a long trip.

Always use windshield washer fluid. Plain water, even that fancy bottled water, may freeze in the fluid reservoir or on the windshield itself, making things worse. Besides, water won’t do a good job of cleaning your windows.

And remember that some vehicles have two reservoirs: one for the windshield and one for the back window – which may be under the hood or somewhere in the back. Schedule A service Today!

Categories
Audi bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC Porsche Service

Air Conditioning Service- Greensboro, NC

Warm weather or cold, North Carolina drivers still need to think about their sedan’s air conditioning. Most people don’t service their air conditioning until after it fails. At Eurobahn Motorsports, we can advise you on your vehicle manufacturer’s preventive maintenance schedules for BMW service, just as we do for transmission service, oil changes and so on.

BMW Air conidtioning

Maintaining your air conditioning system means that you always have enough refrigerant to properly do the job. Small leaks in the sedan’s air conditioning system allow the refrigerant to escape and the system can’t cool the air as well. We see that a lot at Eurobahn Motorsports in Greensboro.

The refrigerant also contains a special oil that lubricates air conditioning components, and keeps the seals resilient. Low refrigerant and lubricating oil means that the air conditioning parts will wear out prematurely, and all North Carolina car owners know that air conditioning repairs can be costly. At Eurobahn Motorsports BMW, we recommended that the air conditioner be run regularly, even during winter months, to keep the parts and seals lubricated.

BMW Air conditioning service at Eurobahn Motorsports starts with a visual inspection of the components for signs of damage or leaks. The compressor is driven by a belt from the engine, most often the serpentine belt, so it’s inspected for cracks or wear. The air conditioning compressor and other components are checked for proper operation. Then comes the leak test. If a leak is detected, often in a hose or connection, it’s repaired and the system is retested.

Then the old refrigerant is evacuated and the system is recharged with clean, fresh refrigerant. A final test insures that the sedan’s air conditioner is working, and you’re on your way.

How often this should be done varies from vehicle to vehicle. Your sedan owner’s manual will have the manufacturer’s recommendation and, of course, your Eurobahn service advisor can tell you. It’s typically every two years.

If you’re not getting enough cool air you know something’s wrong. Also, if you hear strange sounds when you turn the air on, there might be a problem with the compressor and you should get it checked out at Eurobahn. Replacing a bad A/C clutch in a sedan is cheaper than waiting for it to ruin the compressor.

BMW Greensboro drivers need to be aware that there’s one more thing that isn’t directly related to air conditioning service, but does impact the quality of the air in your sedan. And that’s your cabin air filter. This filter cleans dust, pollen, pollution and other impurities in the air that comes from the heater and air conditioner. The cabin air filter needs to be replaced when it’s dirty. If you don’t it’ll start to smell. Not all vehicles have one, so ask your Eurobahn service advisor to check your cabin air filter at the same time they’re doing your air conditioning service.

Categories
bmw bmw dealer bmw parts Greensboro NC Service

BMW Brake Repair Tips – BMW Greensboro, NC

BMW Auto Brake Repairs

brakerepair

Heed these tips and you’re on your way to ensuring your BMW brakes won’t fail:

Repair Tip #1: Keep the hydraulic reservoir at the proper level with the fluid type recommended by BMW. Never substitute or mix types of fluid. Remember also that hydraulic fluid absorbs water. Never use old hydraulic fluid – always use a fresh container.

Repair Tip #2: Keep brakes clean by washing them off at the same time as your car. This keeps squeaky dust and dirt off the pads and makes brakes easier to inspect and work on.

BMW Service Tip #3: Never spray, touch or drip any oil or lubricants on the brake friction surfaces. If this occurs, spray immediately with brake cleaner to remove completely

BMW Repair Tip #4: There are no shortcuts or quick fixes to brake problems. They either function properly or they don’t. Know your brake system – how it should work, feel and sound – before it acts up so you’ll know when something’s wrong.

BMW repair Tip #5: Most imports don’t have serviceable rotors. They must be replaced at the same time as the pads. The rotors cannot be “turned” to remove imperfections. There isn’t sufficient metal thickness to safely accomplish this.

 BMW Repair Tip #6: Keep a repair log with receipts when any service is performed on your BMW. It helps when you need to check if your warranty is still in effect. More importantly, it’s a great gauge of performance and an indicator of other problems.

 Repair Tip #7: Whenever the pads are replaced, the hydraulic system must be bled to remove any air bubbles. Most BMW specialists recommend changing the fluid with every pad replacement. If you’re unsure of the proper technique for bleeding the hydraulic system, don’t perform the job yourself. Seek help from a BMW Greensboroprofessional. ABS equipped cars should be bled only by professionals.

 Repair Tip #8: Most noises are usually related to your pads. However, whenever replacing pads, you should also replace the sensors and seriously consider replacing the rotors at the same time.

Repair Tip #9: After installing new pads, remember to “set” them properly. This conditions them for maximum performance and prevents premature failure. Instructions for setting pads are usually provided in the package with your new pads.

Brake Parts Shopping List

When shopping for BMW brake parts, remember two important things:
1. OEM/OES (original equipment manufactured/supplied) or equivalent pads and rotors are not always cheap. You do, however, get what you pay for. OE parts will give you the most trouble-free driving and peace of mind. And . . . isn’t that what’s most important?

2. Before requesting any brake parts for your BMW, make sure you have the year, exact model designation, engine size and type, brake configuration, type of rotors (solid or vented), vehicle ID number (VIN) and production date. For Volvos, you’ll also need rotor diameter, caliper manufacturer and mount and shape of the pads.

Here is a list of parts you should consider when working on BMW brake systems:

  • Front Brake Rotors (Brake Discs)
  • Front Brake Pads
  • Rear Brake Rotors (Brake Discs) or Rear Brake Drums
    Rear Brake Pads or Brake Shoes
  • Brake Sensors (front and/or rear, as applicable)
  • Brake Calipers or Caliper Rebuild Kits
  • Wheel Cylinders
  • Hydraulic Hoses
  • Hose/Tube Fittings
  • Brake Master Cylinder
  • Power Booster
  • Reservoir & Grommets
  • Brake Proportioning Valve Assembly
  • Hydraulic & Brake Fluid
  • Brake Cleaner
  • Anti-Squeal Compound