Tag: bmw service greensboro nc

Categories
bmw bmw dealer BMW Engine BMW Greensboro bmw parts BMW repair BMW service Greensboro

BMW Engine bed plate Replacement | BMW Service Greensboro NC

Eurobahn is your BMW Greensboro NC Service Center, No job is too big or small for Us!

Your BMW is serviced by a certified BMW specialist. Our resident Master Technician, Aaron, came across a great project recently where he had to pull the transmission out of a BMW 335i. 

Check out the pictures we took in the shop for a better understanding of how the process works.

BMW Engine Bedplate
BMW Engine bed plate

So the customer came in concerned about an oil leak, and we decided it was either the Rear main seal or the Engine bed plate because you cant tell which one it is without pulling out the transmission for sure. So we decided to do the Rear main seal because it was the most accessible, but the leak continued. So we removed the transmission, cleaned the oil and ran the car and found out it was the Engine bed plate leaking.

BMW W54 Engine
BMW N54 Engine

The BMW N54 engine commonly found in the 335i uses a bed plate design. This bed plate, which is basically a 2-piece engine block, is how BMW engineers were able to build a durable, and powerful engine. The 2-piece design is much stronger than the traditional 1-piece casting. Unfortunately in rare cases oil can leak between the 2-pieces — Which requires removal of the engine, and tear down of the bottom end to repair.

Bottom line, we got the job done and the customer left happy.  If your BMW is experiencing similar issues bring it in and let our ASE certified technicians take a look at it. We will get you up and back on the road in no time! Eurobahn is your BMW service repair center greensboro nc . Contact Us today!

Categories
bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC

BMW & MINI Greensboro NC Repair Services: BMW Parts

I know my BMW needs this part replaced. Can you do it?

OEM BMW PARTS
OEM BMW PARTS

You bought the part for your BMW you think needs replacing. We are your BMW Greensboro NC specialists. Are you sure you made the right diagnosis? In past years what typically happens, is that the first part brought in by the customer is not the correct part, or it’s an inferior quality that doesn’t fit correctly.

If the part is installed, then fails, now what? Was it the failure of the part or was in not installed correctly? And how much longer till the correct part is sourced by the customer and the process continue?

It’s is not a win-win for either the customer, the shop, or the tech who was trying his/her best to make it work and was getting frustrated in the process.

    Eurobahn Motorsports is able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional BMW Service Greensboro NC dealership repair shop.

Due to liability, warranty, counterfeit parts, the cost of operating a business, installing customer provided parts for their BMW is not a common practice in our area.

Eurobahn Motorsports is an independent BMW and MINI Cooper repair shop. Our specialists have the necessary tools and extensive BMW repair knowledge and experience to maintain your BMW or MINI to the highest standards.

Our BMW technicians will diagnose and explain why your car is having a problem. By maintaining your car, we will save you money on expensive emergency repair. No need to worry about your car – leave it to us.

Call us today to schedule an appointment at BMW Repair Service Greensboro NC  336.542.3555 or make an appointment online. Your car will be running like new.

Categories
bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC

BMW Greensboro NC | BMW Transmission Problems

BMW Repair Greensboro NC
BMW Repair Greensboro NC

On In recent times, BMW has announced the recall of thousands of its 7 Series and 5 Series cars for defective transmissions. While drivetrain issues have been detected on several Series 3 cars, the most glaring BMW transmission problems have been with the 7 Series, with over 45,000 units being recalled to replace their automatic transmission. At Eurobahn Motorsports we want to be your go to service advisor for any concerns about your BMW Greensboro NC. A brief overview of these problems reveals poor manufacturing and insufficient quality control as some of the high-level causes of these failures.

Rough downshift – One of the primary problems reported with the BMW 7 Series E65 and E66 has been the excessive amount of play and rough shifting between the 2nd and 1st gears while slowing down. Some owners have reported similar problems when rapidly shifting from the 2nd to 3rd gears. Mechanics and analysts believe that this problem may have less to do with sensors or the on-board computer but may be the result of a defective solenoid.

On-board Computer Defects – Another common issue with the BMW 7 and BMW 5 series is the failure of the on-board computer during gear changes or even when the car is started up for the first time. While DIY solutions such as unplugging and a manual reset of the computer have been recommended, owners are advised to contact us for BMW Repair Greensboro NC for a comprehensive diagnosis and solution to the problem.

It is highly recommended to have your car serviced by a certified BMW specialist before the problem turns into something more expensive.

BMW Repair Greensboro NC
BMW Repair Greensboro NC

Disengaged and Unresponsive Gearshift – One of the newer complaints about the BMW transmission problems is that the transmission disengages from a running gear into neutral or does not shift out of a specific gear—usually the 2nd or reverse gear. A defective gear selection switch or bad sensors are suspected to be the cause of these problems. To get this transmission issue fixed come to BMW service center Greensboro NC at Eurobahn Motorsports and our Factory Trained Technicians will take great care of you!

In increasing number of power train problems on account of inferior parts seems to be largely restricted to automatic transmissions although some manual transmission have reported similar problems that remain a concern for mechanics and customers alike. Call Us today to schedule a service appointment 336.542.3555

 

Categories
bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC

BMW Repair Greensboro NC | BMW Electrical Problems

BMW Electrical Service in Greensboro NC

BMW might make great vehicles, but this does not mean that the vehicles are always without problems. BMW electrical problems have actually become fairly common over the last few years, with two recalls taking place in the last three years. If you are driving a BMW 3 or 5 series, you might want to consider the issues that are being reported. We are your BMW Greensboro NC electrical problem solvers, and you can rest assure knowing you’re in good hands with our service adviser.

BMW Electrical Service in Greensboro NC
BMW Electrical Service in Greensboro NC

The latest of the BMW electrical problems has hit the 2008-2010 5-series models. An electrical connection issue exists that can cause a failure of power to the brake lights, turn signals, back up lights and even the rear tail lights in the vehicle. This can lead to dangerous driving conditions on the road—after all, other drivers may not be able to tell when you are signaling, breaking or even if you are on the road at night. More pressing is the very real possibility of being pulled over by the highway patrol for having defective equipment. Instead of paying high dealer prices at BMW of Greensboro NC and bring your car to an Independent Repair Facility, we have state of the art equipment and BMW Certified Technicians.

More serious are the electrical problems with the BMW 3-series. We are happy to help you with BMW Repair Greensboro NC electrical problems at Eurobahn. While the issues with the 5-series might get you a ticket, the electrical problems present with the 2007-2011 3-series might leave you stranded. The reason for these BMW electrical problems actually has to do with a faulty battery cable connection. Because there is an issue with the connection between the cable and the fuse box, the connection will degrade over time. This can lead to a lack of electricity being delivered to the engine, causing the vehicle to stall out. This, in turn, increases the risk of a crash.

If you are dealing with BMW electrical problems in the Triad area, don’t wait to get the issues fixed. Eurobahn Motorsports can deal with these electrical issues and get your BMW back to driving shape. BMW electrical problems have become more common over the last few years, but our ASE certified technicians here Eurobahn Motorsports can help with these issues quickly and effectively. Call us today to schedule an appointment at BMW Repair Service Greensboro NC  336.542.3555

Categories
bmw BMW Greensboro bmw parts BMW service Greensboro NC Service

BMW Service Greensboro NC | Prevent BMW From Burning Oil

At around 80,000 miles, all BMWs start burning oil and may encounter compression problems, or “burned valves”. Eurobahn is your BMW Greensboro NC Service Center and Valve jobs involve removing the engine’s cylinder head(s), so that the guides, seats and valves can be refurbished. This allows oil control and compression to be restored.

Usually, valve train jobs begin by dismantling, cleaning and examining the cylinder head. Heads made from cast iron are “magnafluxed”, to search for hairline cracks. Magnafluxing involves sprinkling iron powder onto the head, whilst exposing the head to a powerful magnetic field simultaneously.

BMW Service Greensboro NC
BMW Service Greensboro NC

 

Usually, valve train jobs begin by dismantling, cleaning and examining the cylinder head. Heads made from cast iron are “magnafluxed”, to search for hairline cracks. Magnafluxing involves sprinkling iron powder onto the head, whilst exposing the head to a powerful magnetic field simultaneously.

After the head has passed this inspection, it is examined for flatness. Undue roughness, warpage or other damage could make the head gasket malfunction. Should the head exceed the maximum permissible out of flatness specifications, it has to be replaced or resurfaced.

       Eurobahn Motorsports is able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional BMW Service Greensboro NC dealership repair shop.

Now, attention turns to the guides, seats and valves. The guides are inspected for wear, and they are virtually always worn. Hence, they have to be either relined, knurled (where the bore size of the guides is reduced, by cutting grooves into the guides’ interior diameter) or replaced. The cylinder head seats are either ground or cut, to repair the sealing surface.

Prevent Your BMW Burning Fuel

Each valve spring is examined and tested to ensure that it is still able to maintain the correct pressure. The keepers, spring retainers and other components are examined as well. Any damaged or worn hardware is replaced. Then, the valves are fitted into the head and leveled to restore the correct valve height.

Prevent Your BMW Burning Fuel
Prevent Your BMW Burning Fuel

Whereas every dealer repair shop performs all of these steps, they do not do so as affordable as a certified repair shop. Having the engine valve train conditioned can cost your pocket book quite a bit, however before you write a check or scan a credit card contact an independent certified BMW Repair service Greensboro NC center like Eurobahn Motorsports. We are able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional dealership repair shop.

 

Categories
bmw BMW Greensboro bmw parts BMW service Service

BMW Service Greensboro NC | BMW Suspension System Repair

Your BMW’s suspension system is an intricate network of cooperating (usually, anyway) components designed to give you a smooth, even, stable ride. Since the suspension is ground zero when it comes to road abuse, the parts wear out, and even break. If your car doesn’t seem to ride like it used to, you may have a problem down below.

BMW Service Greensboro NC
BMW Service Greensboro NC

If your BMW is experiencing any of the following, bring it to Eurobahn Motorsports BMW Greenboro NC for a professional diagnostics and BMW repair:

• If your BMW is Pulling to One Side While Driving.
• Flip-flop wheel shimmy. Wheels seem to wander and wiggle rapidly back and forth.
• Porpoising over bumps or uneven roads. Porpoising, aka bouncing, dipping, diving. Car keeps going up and down after you go over a bump.
• Steering seems to be slipping. As you turn the wheel or hold it in a turned position, it feels like its slipping slightly back and forth.
• If its Hard to steer your BMW and the wheel is hard to turn, especially while moving at slow speed, then it needs BMW repair service Greensboro NC .
• Steering wheel vibrates at speed. Excessive vibration while traveling a constant speed, especially highway speeds.
• Loose or sloppy steering. Steering has excessive play and wanders from side to side.
• Clunking over bumps. Feeling clunks and knocks through the steering wheel when you go over bumps or even cracks in the road.
• If your BMW is Screeching and screaming it needs to be taken to Eurobahn’s BMW Service Center Greensboro NC Steering emits loud screeching when steering at low speeds, such as parking.

At Eurobahn Motorsports we have Factory Trained BMW Service Technicians so we are your choice for BMW Repair Greensboro NC . Schedule Your Appointment with US Today!