Tag: BMW Greensboro

Categories
bmw bmw dealer BMW Engine BMW Greensboro bmw parts BMW repair BMW service NC Service

BMW Service Greensboro | BMW Catalytic Converter

Make sure your vehicle is getting regular maintenance, bring it to us we are your BMW Service Center in Greensboro NC. A catalytic converter rarely fails on a car that has been maintained properly. If it did fail, why? There is usually a problem that is the precursor of the “cat” failure. They usually do not just “stop” (as is the case with some electrical components). There is something else going on in the emission system in front of the cat that is usually the culprit.

BMW Catalytic Converter
BMW Catalytic Converter

 Think you have catalytic converter problems?

If your catalytic converter is damaged by excessive heat, (caused by improper/rich fuel mixture), the substrate melts, blockage will form, gases build up in the exhaust system, your BMW may be stalling. You can avoid expensive repair by following BMW recommended maintenance schedule.

We are your BMW Greensboro NC specialists. We all want clean air, and it is important that you go to an inspection station that has technicians proficient in BMW. It’s easy for someone to condemn your Catalytic Converter, but we have seen so many instances, that it is simply not the case.

The correct diagnosis can save you a lot of money. We are a Service and Repair Station and can help you with any emission related repair for your BMW or MINI. Call us today to schedule an appointment at BMW Repair Service Greensboro NC  336.542.3555 or make an appointment online.

Categories
bmw bmw dealer BMW Engine BMW Greensboro bmw parts BMW repair BMW service Greensboro

BMW Engine bed plate Replacement | BMW Service Greensboro NC

Eurobahn is your BMW Greensboro NC Service Center, No job is too big or small for Us!

Your BMW is serviced by a certified BMW specialist. Our resident Master Technician, Aaron, came across a great project recently where he had to pull the transmission out of a BMW 335i. 

Check out the pictures we took in the shop for a better understanding of how the process works.

BMW Engine Bedplate
BMW Engine bed plate

So the customer came in concerned about an oil leak, and we decided it was either the Rear main seal or the Engine bed plate because you cant tell which one it is without pulling out the transmission for sure. So we decided to do the Rear main seal because it was the most accessible, but the leak continued. So we removed the transmission, cleaned the oil and ran the car and found out it was the Engine bed plate leaking.

BMW W54 Engine
BMW N54 Engine

The BMW N54 engine commonly found in the 335i uses a bed plate design. This bed plate, which is basically a 2-piece engine block, is how BMW engineers were able to build a durable, and powerful engine. The 2-piece design is much stronger than the traditional 1-piece casting. Unfortunately in rare cases oil can leak between the 2-pieces — Which requires removal of the engine, and tear down of the bottom end to repair.

Bottom line, we got the job done and the customer left happy.  If your BMW is experiencing similar issues bring it in and let our ASE certified technicians take a look at it. We will get you up and back on the road in no time! Eurobahn is your BMW service repair center greensboro nc . Contact Us today!

Categories
bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC

BMW & MINI Greensboro NC Repair Services: BMW Parts

I know my BMW needs this part replaced. Can you do it?

OEM BMW PARTS
OEM BMW PARTS

You bought the part for your BMW you think needs replacing. We are your BMW Greensboro NC specialists. Are you sure you made the right diagnosis? In past years what typically happens, is that the first part brought in by the customer is not the correct part, or it’s an inferior quality that doesn’t fit correctly.

If the part is installed, then fails, now what? Was it the failure of the part or was in not installed correctly? And how much longer till the correct part is sourced by the customer and the process continue?

It’s is not a win-win for either the customer, the shop, or the tech who was trying his/her best to make it work and was getting frustrated in the process.

    Eurobahn Motorsports is able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional BMW Service Greensboro NC dealership repair shop.

Due to liability, warranty, counterfeit parts, the cost of operating a business, installing customer provided parts for their BMW is not a common practice in our area.

Eurobahn Motorsports is an independent BMW and MINI Cooper repair shop. Our specialists have the necessary tools and extensive BMW repair knowledge and experience to maintain your BMW or MINI to the highest standards.

Our BMW technicians will diagnose and explain why your car is having a problem. By maintaining your car, we will save you money on expensive emergency repair. No need to worry about your car – leave it to us.

Call us today to schedule an appointment at BMW Repair Service Greensboro NC  336.542.3555 or make an appointment online. Your car will be running like new.