Tag: bmw greensboro nc

Categories
bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC

BMW Greensboro NC | BMW Transmission Problems

BMW Repair Greensboro NC
BMW Repair Greensboro NC

On In recent times, BMW has announced the recall of thousands of its 7 Series and 5 Series cars for defective transmissions. While drivetrain issues have been detected on several Series 3 cars, the most glaring BMW transmission problems have been with the 7 Series, with over 45,000 units being recalled to replace their automatic transmission. At Eurobahn Motorsports we want to be your go to service advisor for any concerns about your BMW Greensboro NC. A brief overview of these problems reveals poor manufacturing and insufficient quality control as some of the high-level causes of these failures.

Rough downshift – One of the primary problems reported with the BMW 7 Series E65 and E66 has been the excessive amount of play and rough shifting between the 2nd and 1st gears while slowing down. Some owners have reported similar problems when rapidly shifting from the 2nd to 3rd gears. Mechanics and analysts believe that this problem may have less to do with sensors or the on-board computer but may be the result of a defective solenoid.

On-board Computer Defects – Another common issue with the BMW 7 and BMW 5 series is the failure of the on-board computer during gear changes or even when the car is started up for the first time. While DIY solutions such as unplugging and a manual reset of the computer have been recommended, owners are advised to contact us for BMW Repair Greensboro NC for a comprehensive diagnosis and solution to the problem.

It is highly recommended to have your car serviced by a certified BMW specialist before the problem turns into something more expensive.

BMW Repair Greensboro NC
BMW Repair Greensboro NC

Disengaged and Unresponsive Gearshift – One of the newer complaints about the BMW transmission problems is that the transmission disengages from a running gear into neutral or does not shift out of a specific gear—usually the 2nd or reverse gear. A defective gear selection switch or bad sensors are suspected to be the cause of these problems. To get this transmission issue fixed come to BMW service center Greensboro NC at Eurobahn Motorsports and our Factory Trained Technicians will take great care of you!

In increasing number of power train problems on account of inferior parts seems to be largely restricted to automatic transmissions although some manual transmission have reported similar problems that remain a concern for mechanics and customers alike. Call Us today to schedule a service appointment 336.542.3555

 

Categories
bmw bmw dealer BMW Greensboro bmw parts BMW service Greensboro NC

BMW Repair Greensboro NC | BMW Electrical Problems

BMW Electrical Service in Greensboro NC

BMW might make great vehicles, but this does not mean that the vehicles are always without problems. BMW electrical problems have actually become fairly common over the last few years, with two recalls taking place in the last three years. If you are driving a BMW 3 or 5 series, you might want to consider the issues that are being reported. We are your BMW Greensboro NC electrical problem solvers, and you can rest assure knowing you’re in good hands with our service adviser.

BMW Electrical Service in Greensboro NC
BMW Electrical Service in Greensboro NC

The latest of the BMW electrical problems has hit the 2008-2010 5-series models. An electrical connection issue exists that can cause a failure of power to the brake lights, turn signals, back up lights and even the rear tail lights in the vehicle. This can lead to dangerous driving conditions on the road—after all, other drivers may not be able to tell when you are signaling, breaking or even if you are on the road at night. More pressing is the very real possibility of being pulled over by the highway patrol for having defective equipment. Instead of paying high dealer prices at BMW of Greensboro NC and bring your car to an Independent Repair Facility, we have state of the art equipment and BMW Certified Technicians.

More serious are the electrical problems with the BMW 3-series. We are happy to help you with BMW Repair Greensboro NC electrical problems at Eurobahn. While the issues with the 5-series might get you a ticket, the electrical problems present with the 2007-2011 3-series might leave you stranded. The reason for these BMW electrical problems actually has to do with a faulty battery cable connection. Because there is an issue with the connection between the cable and the fuse box, the connection will degrade over time. This can lead to a lack of electricity being delivered to the engine, causing the vehicle to stall out. This, in turn, increases the risk of a crash.

If you are dealing with BMW electrical problems in the Triad area, don’t wait to get the issues fixed. Eurobahn Motorsports can deal with these electrical issues and get your BMW back to driving shape. BMW electrical problems have become more common over the last few years, but our ASE certified technicians here Eurobahn Motorsports can help with these issues quickly and effectively. Call us today to schedule an appointment at BMW Repair Service Greensboro NC  336.542.3555

Categories
bmw BMW Greensboro bmw parts BMW service Greensboro NC Service

BMW Service Greensboro NC | Prevent BMW From Burning Oil

At around 80,000 miles, all BMWs start burning oil and may encounter compression problems, or “burned valves”. Eurobahn is your BMW Greensboro NC Service Center and Valve jobs involve removing the engine’s cylinder head(s), so that the guides, seats and valves can be refurbished. This allows oil control and compression to be restored.

Usually, valve train jobs begin by dismantling, cleaning and examining the cylinder head. Heads made from cast iron are “magnafluxed”, to search for hairline cracks. Magnafluxing involves sprinkling iron powder onto the head, whilst exposing the head to a powerful magnetic field simultaneously.

BMW Service Greensboro NC
BMW Service Greensboro NC

 

Usually, valve train jobs begin by dismantling, cleaning and examining the cylinder head. Heads made from cast iron are “magnafluxed”, to search for hairline cracks. Magnafluxing involves sprinkling iron powder onto the head, whilst exposing the head to a powerful magnetic field simultaneously.

After the head has passed this inspection, it is examined for flatness. Undue roughness, warpage or other damage could make the head gasket malfunction. Should the head exceed the maximum permissible out of flatness specifications, it has to be replaced or resurfaced.

       Eurobahn Motorsports is able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional BMW Service Greensboro NC dealership repair shop.

Now, attention turns to the guides, seats and valves. The guides are inspected for wear, and they are virtually always worn. Hence, they have to be either relined, knurled (where the bore size of the guides is reduced, by cutting grooves into the guides’ interior diameter) or replaced. The cylinder head seats are either ground or cut, to repair the sealing surface.

Prevent Your BMW Burning Fuel

Each valve spring is examined and tested to ensure that it is still able to maintain the correct pressure. The keepers, spring retainers and other components are examined as well. Any damaged or worn hardware is replaced. Then, the valves are fitted into the head and leveled to restore the correct valve height.

Prevent Your BMW Burning Fuel
Prevent Your BMW Burning Fuel

Whereas every dealer repair shop performs all of these steps, they do not do so as affordable as a certified repair shop. Having the engine valve train conditioned can cost your pocket book quite a bit, however before you write a check or scan a credit card contact an independent certified BMW Repair service Greensboro NC center like Eurobahn Motorsports. We are able to perform this repair along with any other service or repair your BMW may need at less than half the cost of traditional dealership repair shop.

 

Categories
bmw BMW Greensboro bmw parts BMW service Service

BMW Service Greensboro NC | BMW Suspension System Repair

Your BMW’s suspension system is an intricate network of cooperating (usually, anyway) components designed to give you a smooth, even, stable ride. Since the suspension is ground zero when it comes to road abuse, the parts wear out, and even break. If your car doesn’t seem to ride like it used to, you may have a problem down below.

BMW Service Greensboro NC
BMW Service Greensboro NC

If your BMW is experiencing any of the following, bring it to Eurobahn Motorsports BMW Greenboro NC for a professional diagnostics and BMW repair:

• If your BMW is Pulling to One Side While Driving.
• Flip-flop wheel shimmy. Wheels seem to wander and wiggle rapidly back and forth.
• Porpoising over bumps or uneven roads. Porpoising, aka bouncing, dipping, diving. Car keeps going up and down after you go over a bump.
• Steering seems to be slipping. As you turn the wheel or hold it in a turned position, it feels like its slipping slightly back and forth.
• If its Hard to steer your BMW and the wheel is hard to turn, especially while moving at slow speed, then it needs BMW repair service Greensboro NC .
• Steering wheel vibrates at speed. Excessive vibration while traveling a constant speed, especially highway speeds.
• Loose or sloppy steering. Steering has excessive play and wanders from side to side.
• Clunking over bumps. Feeling clunks and knocks through the steering wheel when you go over bumps or even cracks in the road.
• If your BMW is Screeching and screaming it needs to be taken to Eurobahn’s BMW Service Center Greensboro NC Steering emits loud screeching when steering at low speeds, such as parking.

At Eurobahn Motorsports we have Factory Trained BMW Service Technicians so we are your choice for BMW Repair Greensboro NC . Schedule Your Appointment with US Today!