How to Deal With BMW Drivetrain Malfunction Drive Moderately Problem
- July 23, 2021
- BMW repair
- Posted by eurobahnnc
- Leave your thoughts

When there is a problem with the engine or gearbox, a BMW vehicle may display a Drivetrain Malfunction Drive Moderately error message on the dashboard.
This warning frequently pops up when you are speeding up, climbing a steep incline, leaving a stop sign, or attempting to pass another vehicle. The message can also appear in the cold weather or when driving in normal conditions.
In this article, you’ll learn more about this topic and how to use a BMW scanner to diagnose the problem. For best result, seek BMW service today.
BMW Service Greensboro for Drivetrain Malfunction
What does Drivetrain Malfunction mean?
When the Engine Control Module (also known as DDE ECU ECM or DME) detects an engine or gearbox fault, a BMW Drivetrain Malfunction error message pops in.
To prevent damage, the ECU restricts the maximum torque output.
You may use a BMW scanner to diagnose the problem, which will let you read the error codes from the Digital Motor Electronics (DME) and transmission (EGS) modules.
Symptoms:
Although the symptoms may vary depending on the problem that caused the error, most BMW owners will usually notice:
- An error message about a drivetrain problem on the iDrive screen
- The vehicle begins to shake
- The check engine light is turned on
- The vehicle cuts off or dies when the vehicle is idle or in gear
- Smoke coming from the exhaust pipe
- The vehicle idles rough
- The transmission stuck in the first gear
- Failure of the drivetrain when attempting to pass on the highway
- The automobile won’t start due to a drivetrain problem

What Should You Do?
- Locate a secure parking spot for your BMW.
- Remove the key from the ignition and turn it off.
- Wait at least 5 minutes before restarting the vehicle.
In most instances, this will temporarily fix the BMW drivetrain problem Greensboro NC, enabling you to continue your journey.
Check Out the Engine:
If restarting the engine does not solve the power system failure, drive moderately, park safely, and then turn off the engine again.
Pull the hood and check out the engine. If you notice any leaks and sense any odd smell, it might be a sign of a broken serpentine belt, oil leak, or coolant leak.
- Check the oil level in the engine.
- Keep an eye on the temperature of the engine.
- If the engine overheats or the oil light comes on, turn it off.
To avoid hassle and disruption, bring your car in at BMW Service Greensboro.