Latest Industry News

Most Common Maintenance Tips for Your Audi

audi repair greensboro

If anything that makes Audi a popular choice, it has to be its great design and build, but without maintenance even the best-built cars can fall far from the standard in terms of its performance. To keep your vehicle running smooth, take your Audi to the nearby Audi Repair Greensboro NC that’s been wrenching on German-made vehicles for years.

Audi Engine Maintenance Tips:

  • Timing belt problem is one of most common issues you may be faced with. While getting the timing belt serviced, be sure to change out other components while they are easy to access.
  • Find out the engine code number using your VIN or take off the engine block cover to find it listed on the driver’s side.
  • Check out quickly whether the water pump is leaking or not. If so, you will probably see a coolant train from the pump to the lowest spot on the engine. To avoid being in trouble, bring your vehicle to nearby Audi Repair service centers in Greensboro.

Audi Brake System Maintenance Tips:

  • Use the VIN number to find out the brake code and or inspect a deal by removing the wheel and looking at part number on the rotor.
  • Be sure to change the brake fluids every 30, 000 miles or 3 years – whichever comes first. To save your time, money, and hassle, change it immediately whenever the rotor and brake pad are being replaced.
  • Usually, front brakes and or rotors should be replaced within the next 3, 000 miles. The Audi brake pad warning light will indicate whether the Audi requires any such replacement. To determine if your rear brakes need to be replaced, listen for metal sound or feel vibration when braking.

Audi service Greensboro NC

Audi Steering and Suspension Maintenance Tips:

  • For wheel bearing, if you hear some humming sounds that change pitch at different speeds, it’s time to change to replace it. A bad wheel bearing produces a low humming sound between 25-35 mph, and it will turn into a high pitch sound the faster you go.
  • Be sure to change power steering fluid every 30, 000 miles, especially in hot climates. Remember, changing your power steering fluid is important step to prevent damage to to other component and help solve hydraulic issues.
  • Have the ball joints inspected annually and anytime there is any handling issue. This might signal that ball joints could be going and need to be supplanted immediately.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back to top